Cres Cor 1000-CH-SS User Manual Page 2

  • Download
  • Add to my manuals
  • Print
  • Page
    / 2
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 1
1000-CH-SS-D-SPLIT SERIES
5925 Heisley Road • Mentor, OH 44060-1833
Phone: 877/CRESCOR • Fax: 440/350-7267
www.crescor.com
© Crescent Metal Products, Inc. 2011 All rights reserved. Litho in U.S.A.
In line with its policy to continually improve its products,
CRES COR reserves the right to change materials and
specications without notice.
SHORT FORM SPECIFICATIONS
Cres Cor Insulated Radiant Oven Model 1000-CH-SS-D-SPLIT;
Solid state electronic controlled times and temperatures.
Outer body of 22 ga. stainless steel; inner body, top and
frame of 18 ga. stainless steel. Fiberglass insulation
1-1/2" in walls; 1" in door. Stainless steel internal frame;
coved corners. Anti-microbial chrome plated latch.
Thermometer. Three (3) heated inner walls. Removable
pan supports for (8) 18" x 26" pans spaced on 3" centers.
Casters 5" swivel modulus casters, Delrin bearings.
Load capacity 250 lbs. each. 2-Year Parts / 1-Year Labor
warranty. Lifetime on heating elements (excluding labor).
Provide the following accessories: _____ _____ _____.
CABINET:
Body: 22 ga. stainless steel outer body.
Inner body & top: 18 ga. stainless steel.
Reinforcement: Internal framework of 18 ga. stainless steel.
Insulation: Fiberglass, thermal conductivity (K factor) is .23 at
75˚F, 1-1/2" in walls, 1" in doors.
Drip pan: 18 ga. stainless steel with drain.
Casters: 5" dia., swivel, modulus tires, 1-1/4 wide, load cap.
250 lbs. each, temp. range -45˚/+180˚F. Delrin bearings. Front
casters equipped with brakes.
DOOR:
Field reversible.
Formed 20 ga. stainless steel.
Latch: Anti-microbial chrome plated zinc with composite handle,
ceramic magnetic type; mounted inboard.
Hinges (2): Heavy duty chrome plated zinc; mounted inboard
Gaskets: Perimeter type, silicone.
PAN SLIDES:
18 ga. stainless steel angles, 1 x 1-3/8; riveted on 3" centers.
Grids: Stainless steel, 18 x 26; supplied with (3) grids.
CLEARANCE REQUIREMENTS:
3" (76mm) at the back, 2" (51mm) at the top, 1" (25mm) at both
sides.
POWER REQUIREMENTS:
3000 Watts, 208/240 Volts, 60 Hz., 1 phase, 20 Amp. Service
14 Amps at 208 Volts, 13 Amps at 240 Volts.
3000 Watts, 208/240 Volts, 60 Hz., 3 phase, 20 Amp. Service
8 Amps at 208 Volts, 7 Amps at 240 Volts.
ELECTRICAL COMPARTMENT:
Control panel: Formed stainless steel; black front.
Thermostats (cook/hold): Solid state digital display control, 140°F
(60°C) to 325˚F (163˚C).
Switch: ON-OFF push button type.
Probe: (1) 6", stainless steel.
Power Cord: Permanent, 6 ft. 12/3 ga. with right angle plug.
Three (3) heater circuits.
Thermometer: Digital display.
Voltage selector switch: Change to 208 or 240 Volt; on back of oven.
INSTALLATION REQUIREMENTS:
Check local vent hood codes for mobile Cook-N-Hold ovens.
Ovens with no cord or plug must be attached to building with a
exible connector. Not factory supplied.
CRES COR
MODEL NO.
PAN DIM "A" DIM "B" DIM "C" INSIDE CLEAR DIMENSIONS* WEIGHT
ACT.
CAP SIZE WIDTH DEPTH HEIGHT WIDTH DEPTH HEIGHT
1000-CH-SS-D-SPLIT
8
18 X 26 IN 22-5/8 32-3/4 42 18-3/16 27 25 LBS 215
460 X 660 MM 575 835 1070 465 690 635 KG 98
1000-CH-SS-D-SPLIT
(Stacked)
16
18 X 26 IN 22-5/8 32-3/4 77 18-3/16 27 25 LBS 430
460 X 660 MM 575 835 1960 465 690 635 KG 195
*Inside dimensions for each compartment
W
G
Y
X
G
Z
6-20P L15-20P
DATE 4/14/11
PAGE E7.1D & E7.2D
MODEL 1000-CHD-SPLIT
PAN SLIDE
DETAIL OF
1-3/8
3"
B
A
14-1/2
"C"
"A"
"B"
3"
L15-20P
Y
X
G
Z
MODEL 750-CHSSD
G
6-20P
Page view 1
1 2

Comments to this Manuals

No comments